Phone Control
- Traditional Remotes
- − No
- Other Smart Controllers
- ✓ Yes
- DockHub Uno
- ✓ Yes
One lift controller, one gateway, and the motor boards your lift needs. Run it from the app, share access, and see status from anywhere.
Provides the system's Wi-Fi and cloud connection, then communicates with the Lift Controller over DockHub's local radio link.
The required board in position 1 contains the System MCU and coordinates the complete local motor-board cluster.
Passive boards in approved positions 2 through 4 add motor channels without creating separate accounts or cloud devices.
Operate through the DockHub app or optional Remote Control while the Lift Controller remains responsible for command handling.
Every command takes the same route. Select a stage to see what it does.
Operate the lift, check status, manage settings and share approved access. Guests get their own login, so nobody trades remotes.
Operate the lift, check status, manage settings and share approved access. Guests get their own login, so nobody trades remotes.
Routes each command to the right gateway, records device status and sends notifications when something needs attention.
Provides the system's Wi-Fi and cloud connection, then talks to the lift controller over a local radio link. Mounts indoors, not at the dock.
Owns command handling. Holds the safety logic, runs digital auto-stop and drives the motor-board cluster.
Board position 1 is the master. Passive expansion boards occupy positions 2 through 4, and every populated board uses the same channel configuration.
Every configuration ships with a complete lift controller and gateway. Choose how many motor boards your lift needs.
Confirm motor voltage, phase and horsepower before ordering.
Confirm motor voltage, phase and horsepower before ordering.
DockHub

The clear choice for modern boat lift control
RECOMMENDED| Feature | Traditional Remotes | Other Smart Controllers | DockHub Uno |
|---|---|---|---|
| Phone Control |
−
No
|
✓
Yes
|
✓
Yes
|
| Start Before Arrival |
−
Range Based
|
✓
Yes
|
✓
Yes
|
| Installation Time |
−
60+ min
|
−
45+ min
|
✓
30 min
|
| Guest Access |
−
No
|
✓
Yes
|
✓
Yes
|
| Service Calls |
✓
Rare
|
−
Frequent
|
✓
Rare
|
| Lost Remote Cost |
−
$60+ each
|
−
$100+ each
|
✓
$25 for 2
|
| Monthly Fees |
✓
None
|
−
Some
|
✓
Add-ons Only
|
| Price Range |
−
$600-1000
|
−
$1000-2500
|
✓
Starting at $600
|
| Motor Load Monitor |
−
No
|
−
No
|
✓
Yes
|
| Messy Wire Nuts |
−
Yes
|
−
Some
|
✓
No
|
In the same box fits all the components you need for any lift. Our Gateway can control multiple lift controllers. Each with owns protection. Buy what you need, save on what you dont, and upgrade what you have.
Clean internal layout with real working room. Proper spacing, labeled terminals, and space to route conductors without fighting the wires. And yes, WAGO terminals so you can leave the crimper home.
Our system is the first to constantly monitor how much electricity your motors are pulling so we can catch irregularities and shut things down before real damage occurs.
Use the DockHub app to operate the lift, view system status, manage settings, and share approved access. Our dashboard makes multi lift management a breeze. Check out our software page for more details.
Built with electricians and dock builders. Real feedback. Real updates. A system that evolves with the people installing it. We are just getting started.
The numbers an electrician or dock builder asks for before wiring anything.
Wiring and install guideUno · spec rev 2026.09Raise, stop and lower from your phone, at the dock or from the road. Start before you arrive and the boat is waiting.
Give family, guests and your installer their own login. Revoke it in a tap. Nobody trades remotes.
One board for a single motor, four for the biggest lifts. Add expansion boards as the dock grows.
Solid-state switching, digital auto-stop and over-the-air updates, in an enclosure built with room to work.